Watch Video How to Tie a Tie - Expert Instructions on How to Tie a Tie
Is a tie, a piece of cloth measuring approximately 5x 50cm with various shades of color also is an accessory a man who quite often used and can be used as a collection. Besides giving the impression of an official, in your view, the tie will make you look more cool and trendy. One of them, because the tie can be worn anytime, even when you wear a T-Shirt.
However, although this is quite popular accessory for men, not a few men who can wear a tie with a neat and quick. Well, so you can wear a tie with easy, let us consider the following tips;
Type the basis of wearing a tie, the type commonly called Windsor, cirikhasnya is a triangular knot. And is usually worn for formal occasions. This type is more appropriate when used with a wide collar shirts. There are also other basic types, among them ..
The four-in-one knots
This type can be said to be the most popular type of vertices and the most simple to learn. Final form of this knot is long and straight but slightly tilted. Some steps to wear a tie with this type, as follows;
1. Put the tie at the neck with the tip of the width of a tie (fuller) longer than the leading edge of the flat (thinner) and then cross over the thinner fuller
2. Then turn right towards the back fuller under section thinner.
3. After that, pull and turn back toward the front part fuller.
4. Pull up fuller and input into the loop formed between a shirt and tie.
5. Hold the front of the knots with the thumb and fuller swivel down over the front circle.
6. Move your finger, and tighten the knots with a curved shape to hold the collar of a shirt with paint thinner and then pull the knot and trim.
Half-Windsor knot
This type, still node triangle, the type that can be said to be more formal than the four-in-one knots. Type which is also the most popular and often worn men. Characteristic of this type is a smaller knot.
1. Still the same initial step, the position was on the thinner fuller after crossed.
2. Pull back fuller thinner.
3. Put Fuller to the top.
4. Then enter the fuller between the collar of a shirt and tie.
5. Put fuller forward, on top of paint thinner (from left to right).
6. Then tie a fuller play to the back and pull up through the loop between the collar of a shirt and tie.
7. After that point the fuller down through the front knot.
8. Tighten knots and knots hold up (the shirt collar)
Another way can be seen in the figure below:
Keep in mind, ties are essential accessories that can affect your appearance, it needs special attention in terms of treatment of a tie, here are some tips on caring for your tie to keep it neat and durable;
* Remove your tie knot, and tie hanging after use
* To remain soft, while saving the tie in the drawer / cabinet, do not forget to roll with the paint thinner in the roll ..
* When a tie hanging, hanging on the hanger (the hanger) is neat, do not give the brace above the tie.
* Remember to always hang upside down (seam at the top) when drying, it avoids tie color fading.
* If you want to travel, roll and tie your tie store in a bag (perhaps in a sock, if indeed there is no bag tie)
* Remember to always cut the rest of the thread hanging on a tie, do not pull it to avoid damage.
* Avoid the use of a tie in two or more consecutive use, tie it takes to be re-forms the original.
* When removing a tie, do not forget to get through the early stages of use, must not draw it.
by reading way too practical tips on the use of a tie, have confidence in your elegant style at every opportunity.
0 comments:
Post a Comment